Fender T/V 250K Potentiometer Solid Shaft

250K Volume or Tone pot with solid shaft. Use solid shaft pots with knobs which have screws for mounting.

Fender T/V 250K Split Shaft Potentiometer

Top-quality 3/8" shaft, 250k pot with mounting nut and washer. Use these split shaft pots with knobs that press on, like top hat knobs found on Stratocasters

Fender Strat/Tele 3-Way Pickup Selector Switch

Replacement 3-way pickup selector switch used on American Vintage Stratocasters and Telecasters.

Fender 4-Way Telecaster Pickup Selector Mod Switch

Used on many Custom Shop instruments, this switch allows you to change your Telecaster's pickup wiring from series to parallel for increased output and a fatter tone with the flick of a switch.

Fender American Standard Strat 5-Way Pickup Selector Switch

Replace that worn switch with the real deal.

Switchcraft 1/4" Output Jack

DiMarzio brings you this Switchcraft 1/4" Output Jack so you no longer need to tolerate a loose connection. With mounting hardware.

Fender Replacement CAP CD .03uF 100V 20%

This Fender Replacement CAP CD .03uF 100V 20% is for the pickup wiring of your guitar.

Fender Replacement CAP MPF RDL .022uF 250V 10%

Fender MPF RDL .022uF 250V 10% replacement cap.

Fender Replacement CAP CD .05uF 100V 20%

Here's the Fender Replacement CAP CD .05uF 100V 20% for your guitar pickup that you've been looking all over for.

Fender Replacement Shield Pickguard '62 Strat

Thin foil shielding for underside of pickguard.

Fender Replacement Shield Pickguard '62 P Bass

Replacement shield mounts easily beneath the pickguard on your '62 Precision Bass.

DiMarzio Copper Shielding Tape 24""x3-1/2""

Put some of this DiMarzio Copper Shielding Tape under your guitar's pickguard and kiss hum goodbye. Also good for shielding pots, wires and interior connections in your axe to attenuate radio frequency interference. 2 feet of 3-1/2" wide tape.